fuse box diagram 200 1.9d van ??

[casablanca]

Will try it tomorrow. should it have constant current when the ignition is on?

Can I be a pain and ask for the fuse of the radio?:wave:

Thanks

[Rustscrat]

Yep, should have power on it when ignition is on.

Radio fuse - F25 for the constant supply, F1 is switched with ignition.
alut:

[casablanca]

Thanks Rustcart, the radio is now working.

But the brakes still not working, there is no current in the fuse number 12. checked the fuse and changed it but still no power in that hole. Any idea on how to proceed, where does the fuse hole gets its supply from.

Thanks

[Rustscrat]

If you can send me your vin No. via Private Mail I'll make sure I have got the correct wiring diagrams. tudy:

[Rustscrat]

Hi, now we have got the correct drawings - It is fuse 5 in the fuse box under the steering wheel. Again this becomes live when the ignition is on.
Make sure your fuse box looks like the picture in post 7 of this thread.

Let us know how you get on or if you require more help. :thumbsup:
Cheers. alut:

[casablanca]

Hi, now we have got the correct drawings - It is fuse 5 in the fuse box under the steering wheel. Again this becomes live when the ignition is on.
Make sure your fuse box looks like the picture in post 7 of this thread.

Let us know how you get on or if you require more help. :thumbsup:
Cheers. alut:

Hey, Finally I can use my berlingo, the brake is fixed :thumbsup: . It was the fuse and the switch needed adjusting.

now when I bought it and was driving it back I tried the heating blower and it was working but when I put full on it stopped working and I heard a little blow in the fuse box area :brickwall:.
any idea what that could be or what is the fuse number of the heater.
thanks

[Rustscrat]

Try fuse 16. (should be 30Amp) If not check all fuses one by one.
:thumbsup:

[bros400pgm]

In meantime I have attached PDF file Data:Electrical Equipment from the M49 (Mk1) showing both Fusebox`s / Fuse Identification.

Thanks for the pdf :wave::wave:

[Dazzer38]

Thank you for this. It has help
Me out

Cheers

[elliottb]

hi all newbie here .... bouhgt a 1.d van and had no rev or speedo ... thought it was the usual cluster failure so bought another one ... fitted today but still got same problem...
what i need now and isnt in the hayes manual is an actual picture or diagram of both fuse boxes . i think someones been messing about with them .. ive had a fuse tester on them and some are working and some aint ... i know f2 is for the cluster but i need an actual idiot proof pic or diagram of both to make sure all is where it should be ... any help or advice would be gratefully welcome

Look in How to /guide section http://www.berlingoforum.co.uk/forumdisplay.php?fid=12

In meantime I have attached PDF file Data:Electrical Equipment from the M49 (Mk1) showing both Fusebox`s / Fuse Identification.

If you are removing fuse`s /connections to test, follow the BSI reset procedure to disconnect the battery. Follow this link:

http://www.bba-reman.com/content.aspx?co...ol_failure

What is working on the instrument cluster ?

Can you provide some more info on your motor
Model
Gearbox type
ABS Yes / No
EPS Yes /No
RPO Number this is a five digit number found on a sticker below the `A` post driver side it might be something like 08900
This helps for wiring diagram identification.

thanks